DynoGPS.com
DynoGPS.com
Easily perform multiple measurements – in "Logger" mode, all you need is the SPACE key.
Easily perform multiple measurements – in "Logger" mode, all you need is the SPACE key.
Enter the run data, then start the test. The measurement results will appear immediately after completion.
Measure acceleration times with high accuracy. One product - many uses.
The software uses raw GNSS data via COM port. With our device, you can achieve a frequency of up to 30Hz!
When creating DynoGPS, we had a clear goal – to design the most transparent, lightweight, and easy-to-use road dynamometer.
The program automatically detects the end of acceleration and switches to a 15-second rolling resistance (loss) measurement
Clean, minimalist software simplifies every stage of work — from configuration, through measurement, to the final chart.
A device communicating via COM Port and transmitting raw GNSS data is required for measurements.
Depending on the chosen device, you can achieve a frequency from 1Hz up to 30Hz.
Buy DynoGPS access and dedicated device — paid via Stripe.
12-month accessFull access to the software for 12 months.
Dedicated deviceRecommended GNSS receiver ready for DynoGPS.
Are you interested in our product?
The software is currently in BETA tests. Final adjustments are in progress.
If you already have a GPS device or would like to purchase a dedicated device, you will receive free 3-month access.
By using our recommended device you’ll achieve the maximum possible performance - 30 Hz❗
Click to send an email or open a WhatsApp chat.
